Mio A501 - Manual (Page 181)

Getting Connected
10-3
Starting and Ending a Modem Connection
To start the connection, install the modem card. Then, use the desired
program. For example, switch to Internet Explorer Mobile and browse to a
web page. Your device will automatically connect.
To end the connection, tap the icon on the Navigation bar and then tap
Disconnect .
Wireless Network Connection
Use a wireless network card to connect to a wireless network without
physical cables.
Before creating the connection, you need to:
Have a wireless network card (SDIO card) that is compatible with the
device. (For driver and installation procedures, see the documentation
that came with the SDIO card.)
If necessary, obtain the authentication information from your network
administrator.
Creating a Wireless Connection to a Network
1. Install the wireless network card.
2. By default, the device will automatically detect the available wireless
networks.
3. If more than one network is detected, the
screen will display a network list. Tap the
desired network and tap the
OK soft key.