Mio A501 - Manual (Page 140)

7-4
Camera
Taking Continuous Pictures
While in the Camera mode, you can switch to the Continuous mode to take 3
continuous pictures with a single press of the Camera button.
Tap . The icon on the
top-right corner indicates the Continuous mode. Take pictures according to
the instructions described in the “Taking Pictures” section.
NOTE: The Continuous mode supports the resolution of 800X600 and 640X480 only.
The flash is turned off automatically in this mode.
Adding the GPS Stamp into the Picture
The program incorporates an additional GPS Stamp function. With this
function, the longitude and latitude information of the location where you
take a picture can be added into the meta data of the picture. You can then
use the optional navigation program to navigate to the location where the
picture was taken.
In Camera, tap
. Now you are ready to use the GPS Stamp function.