MicroNet Technology SP5001/S - Manual (Page 73)

72
19.7.10 [pppoe]
Display PPPoE related information.
usr/config$ pppoe
PPPoE device information and configuration
Usage:
pppoe [-print]|[-open]|[-close]
pppoe [-dev on/off][-id username][-pwd password]
-print Display PPPoE device information.
-dev Enable(=1) or Disable(=0) device.
-open Open PPPoE connection.
-close Disconnect PPPoE connection.
-id Connection user name.
-pwd Connection password.
-reboot Reboot after remote host disconnection.
usr/config$
Figure 50. pppoe command list
Parameter Usages:
-print print PPPoE status.
-dev Enable PPPoE Dial-up function
-open Open the connection
-close Close the connection
-id Input the User name ID provided by ISP
-pwd Input the User name password provided by ISP
-reboot Reboot the PPPoE connection.
usr/config$ pppoe -print
PPPoE adapter information
Device : Enabled
Status : Not initialized
User name : pppoe
Password : *****
Reboot : No
Figure 51. pppoe –print command list