MicroNet Technology SP5001/S - Manual (Page 63)

62
B. 2MB Rom:
usr/config$ rom –boot2m –s 192.168.1.1 –f 2m4asipfxs.104b
Description: -app / -boot2m means the prepared upgrade Rom; -s means
where the TFTP / FTP server IP Address is; -f is the Rom file name.
Step 4. Download complete
A. Application Rom:
Use command [flash -clean] to clear old configurations. It will keep all
configurations in [ifaddr] and [pppoe].
B. 2MB Rom:
All configurations will be back to default value, including IP Address. In
other word, user has to set IP Address and MAC Address before [reboot]
the device; otherwise, user cannot access to device any more via Telnet.
Steps 4.1 Find out MAC Address:
There are 12 digits on label on the back panel of the device, or
command as
usr/config$ ifaddr –ifshow (find the list information of Ethernet
address, it is MAC Address.
usr/config$ setmac (set as 2 digits as a group)
00
01
a8
00
xx
xx
If confirmed, press y.
Steps 4.2: Set IP A ddress
usr/config$ ifaddr –ip xxx.xxx.xxx.xxx –mask
xxx.xxx.xxx.xxx –gate xxx.xxx.xxx.xxx (Please refer to Chapter
19.7.6)
Steps 4.3: Hardware version confirmation
Upgrade 2MB Rom may change the hardware column. If it is
not as the same as the one, which is found on the label of back
panel, please command as
usr/config$ rom –hwver x.x
Steps 4.4: [commit], [reboot]