MicroNet Technology SP5001/S - Manual (Page 34)

33
6. Network Interface Screen
Click Network Interface in the navigation panel and open the Network Interface
Screen.
Use this screen to setup Network Interface identification information for SP5001/S.
Figure 17. Network Interface
The following table describes this screen.
Table 3. H323 Configuration
LABEL DESCRIPTION
IP Address Enter the IP Address of SP5001/S in dotted decimal notation for e.g.
192.168.4.92. Range of IP Address setting (0.0.0.0~255.255.55.255).
Subnet Mask Enter the IP Subnet Mask of your SP5001/S in dotted decimal notation for
e.g. 255.255.0.0.
Default Routing
Gateway
Enter the IP Address of the default-outgoing gateway of your SP5001/S in
dotted decimal notation for e.g. 192.168.1.254.
DHCP Select enable/disable Dynamic Host Configuration.
DNS primary Enter the DNS IP Address in dotted decimal notation for e.g. 168.95.1.1
DNS Secondary Enter the DNS secondary IP Address in dotted decimal notation for e.g.
168.95.1.1
SNTP Select enable/disable Simple Network Time Protocol.