Installing the battery – Motorola C300 User Manual

Page 14

Getting S

tarted

Installing the Battery

Before you can use your phone, you need to install and
charge your battery.

Caution: Do not remove the battery when your phone
is on—you may lose all your personal settings stored

either in your SIM card or phone memory.

1 If the battery door is already

in place, push down the
battery door release latch,
then slide the door slightly
downward.

2 Pull the cover up and off the

phone.

3 Place the battery onto the back of the handset, with the

battery’s contacts facing down in alignment with the
contacts on the battery compartment.

4 Push the battery forward into

the compartment.

5 Press the battery down until it

clicks into the compartment.

C300.book Page 14 Thursday, November 7, 2002 4:06 PM