Multi-Tech Systems MVPFX2-2 - Manual (Page 72)

Technical Configuration MultiVOIP FX User Guide
72
Voice/Fax Parameter Definitions
Field Name Values Description
AutoCall Parameters
Auto Call AutoCall The AutoCall option enables the local
MultiVOIP to call a remote MultiVOIP
without the user having to dial a Phone
Directory Database number. As soon as
you access the local MultiVOIP
voice/fax channel, the MultiVOIP
immediately connects to the remote
MultiVOIP identified in the Phone
Number box of this option.
This function applies on a channel-by-
channel basis. It would not be
appropriate for this function to be
applied to a channel that serves in a
pool of available channels for general
phone traffic. This function requires an
entry in the Outgoing phonebook of the
local MultiVOIP and a matched setting
in the Inbound Phonebook of the
remote voip.
Phone
Number
-- Phone number used for Auto Call
function or Offhook Alert Timer
function. This phone number must
correspond to an entry in the Outbound
Phonebook of the local MultiVOIP and
in the Inbound Phonebook of the
remote MultiVOIP (unless a gatekeeper
unit is used in the voip system).