Multi-Tech Systems MVPFX2-2 - Manual (Page 145)

MultiVOIP FX User Guide Operation & Maintenance
145
Reboot Voip
The Reboot Voip command allows you to reboot the MultiVOIP unit on demand. In the general course of
operation, this command will not be needed. The command is included, however, to provide a remedy for
situations when, by unexpected circumstances, code becomes corrupt and normal operation goes awry.
To invoke the Reboot Voip command, click on Reboot Voip in the sidebar menu and click OK to confirm
your choice to reboot.
Restore Factory Defaults
This command sets many MultiVOIP parameters back to their original values, as set in the factory. In the
process of restoring factory default values, this command reboots the MultiVOIP unit. The Restore Factory
Defaults command does not alter user-specified IP Parameters settings; nor does it erase entries in the Inbound
Phone Book or the Outbound Phone Book.
To invoke the Restore Factory Defaults command, click on Restore Factory Defaults in the sidebar menu.