Multi-Tech Systems MVPFX2-2 - Manual (Page 16)

Preliminaries & Info Gathering MultiVOIP FX Quick Start Guide
16
Phone/IP Details *Absolutely Needed*
Before Starting the Installation
The MultiVOIP will interface with both the IP network and the phone system. You must gather
information about the IP network and about the phone system so that the MultiVOIP can be configured to
operate with them properly. A summary of this configuration information appears on page 17 (“Config
Info CheckList”).
Gather IP Information
Ask your computer network
administrator. Info needed to operate:
all MultiVOIP models.
IP Network Parameters:
Record for each VOIP Site
in System
#
• IP Address
• IP Mask
• Gateway
• Domain Name Server (DNS) Info (optional)
Phone/IP Details *Absolutely Needed*
Gather Telephone Information (Analog)
Analog Phone Parameters
Ask phone company or
telecom manager.
Needed for:
MVPFX2-8
MVPFX2-4
MVPFX2-2
Analog Telephony Interface Parameters:
Record for this VOIP Site
#
• Which interface type is used?
FXS _____ FXO _____
• If FXS, determine whether the line will be used for a
phone, fax, or KTS (key telephone system)
• If FXO, determine if line will be an analog PBX
extension or an analog line from a telco central office