Maxtor ATLAS 10K III - Manual (Page 60)

Specifications
4-8 Maxtor Atlas 10K III
/'%*#0+%#.
The Maxtor Atlas 10K III hard disk drives have the following mechanical
characteristics:
Height
1
: 1.0 in. (25.4 mm)
Width: 4.0 in. (101.6 mm)
Depth: 5.75 in. (146.1 mm)
Weight (4-disk): 1.58 lb (720 grams)
All dimensions are exclusive of any optional faceplate.
'08+410/'06#. %10&+6+105
Table 4-7 summarizes the environmental specifications of the Maxtor Atlas 10K
III hard disk drive.
Table 4-7 Environmental Specifications
1. No condensation.
2. Altitude is relative to sea level. 1,000 feet = 3,000 meters.
1.
Except when shock feet are uncompressed (see Section 3.2.1, "Shock Feet" on page 4 of Chapter 3).
2#4#/'6'4 12'4#6+0) 010 12'4#6+0)
Temperature
(Non-condensing)
5
°
to 55
°
C
(41° to 131
°
F)
-40
°
to 70
°
C
(-40
°
to 158
°
F)
Temperature Gradient
(Non-condensing)
20
°
C/hr maximum 30
°
C/hr maximum
Humidity
1
Maximum Wet Bulb
Temperature
5% to 95% RH
37
°
C (98°F)
5% to 95% RH
46
°
C (126°F)
Humidity Gradient 30% per hour 30%per hour
Altitude
2
-300 m to 3,048 m
(-1,000 to 10,000 ft.)
-300 m to 12,000 m
(-1,000 to 40,000 ft.)