Maxtor ATLAS 10K III - Manual (Page 209)

SCSI Description
Maxtor Atlas 10K III 5-145
0x04
Hdwe
Error
0x06 0x86 RECAL EC_RCL_SK_BIAS
Seek failure during Bias
Calibration.
0x06 0x87 RECAL EC_RCL_SK_KTJ
Seek failure during KT/J
Calibration.
0x06 0x88 RECAL EC_RCL_SK_PES
Seek failure during PES
Calibration.
0x06 0x89 RECAL EC_RCL_SVO_NOT_RDY Recal servo not ready.
0x06 0x8A RECAL
EC_RCL_SW_POINT_
PARAM_BAD Switch Point calibration results
are bad.
0x06 0x8B RECAL
EC_RCL_TRACK_NUM_
BAD
Recal track number bad.
0x06 0x8C RECAL
EC_RCL_SK_SWITCH_
POINT Seek failure during switch point
cal.
0x06 0x8D RECAL EC_RECAL_MAP_HEADS
Not all Head(s) in USER head
map were found alive
0x06 0x8E RECAL
EC_RCL_NO_SAMS_
FOUND
Valid SAMs not found !!!
0x06 0x8F RECAL
EC_RCL_SYNC_2_SPOKE_FAI
L
Sync To Disk Spokes failed.
0x06 0x90 RECAL EC_RCL_INVALID_CP18 Invalid CP18 on disk.
0x06 0x91 RECAL EC_RCL_INVALID_CP21 Invalid CP21 on disk.
0x06 0x92 RECAL EC_RCL_INVALID_CP22 Invalid CP22 in NVR.
0x06 0x93 RECAL
EC_RCL_HEAD_POLARITY_FA
IL
Head polarity cal failed.
0x06 0x94 RECAL
EC_RCL_CP22_HEAD_
POLARITY Invalid head polarity vector in
CP22.
0x06 0x95 RECAL
EC_RCL_ERASE_BAND_
SK1 Seek 1 failure during servo writer
erase band resync.
0x06 0x96 RECAL EC_RCL_SK_ARC
Seek failure during ARCs
Calibration.
0x06 0x97 RECAL EC_RCL_SK_PESLIN
Seek failure during Pes
Linearization.
0x06 0x98 RECAL EC_RCL_PESLIN_BODE
Error during Pes Lin bode mea-
surement.
0x06 0x99 RECAL
EC_RCL_ERASE_BAND_
SK2 Seek 2 failure during servo writer
erase band resync.
0x06 0x9A RECAL
EC_RCL_PESLIN_TABL_
UPDATE Seek failure during pes
linearization table update.
0x06 0x9B RECAL
EC_RCL_TURBO_SPIN_
RECOVERY Motor speed error after turbo
spin recovery.
0x06 0x9C RECAL
EC_RCL_BAD_ELEC_OFFSET
_VAL Electrical offset calibration
returned an invalid value.
0x06 0x9D RECAL
EC_RCL_HEAD_POLARITY_DE
AD Went servo dead during head
polarity/coarse ATT cal.
5GPUG
-G[
5GPUG
%QFG
5GPUG
3WCNKHKGT %CVGIQT[
/GUUCIG /GCPKPI