Maxtor ATLAS 10K III - Manual (Page 111)

SCSI Description
Maxtor Atlas 10K III 5-47
7PKV #VVGPVKQP %QPFKVKQP 2CIG J
The Unit Attention Page is used to enable or disable the generation of Unit Attention
Conditions. The Unit Attention Condition Page format and field descriptions are
described in Table 5-62 and Table 5-63 respectively.
Table 5-62 Unit Attention Condition Page (Page 0)
Table 5-63 Unit Attention Condition Page (Page 0)
Bit
$[VG
0 PS Rsvd Page Code (00h)
1 Page Length (02h)
2 Reserved DUA Reserved
3 Reserved (00h)
(KGNF &GHCWNV 8CNWG &GUETKRVKQP
PS 1
Parameters Savable. This bit is only used with the MODE
SENSE command. A returned value of 1 indicates that the tar-
get is capable of saving the page in a non-volatile, vendor-
specific location. The bit is reserved with the MODE SELECT
command.
DUA 0
Disable Unit Attention. When set to the default value of 0,
the drive reports a CHECK CONDITION for any UNIT ATTEN-
TION condition (power-on, SCSI bus reset, etc.)