Grizzly G1033X - Manual (Page 14)

-12-
Model g1033X (Mfg. since 4/12)
in the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
NOTICE
Some hardware/fasteners on the inventory
list may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are miss-
ing.
figure 3. planer box inventory.
A
B
C
d
box Inventory (figure 3) Qty
A. planer Unit .................................................. 1
b. dust hood .................................................. 1
C. table Extension Wings ............................... 2
D. handwheel ................................................. 1
E. hardware and tools (not shown)
• t-handle t-25 torx drivers .................. 2
• indexable Carbide inserts .................. 10
• Flat hd torx screws #10-32 x 1 ⁄
2
" ...... 20
• hex Wrenches 3, 4, 5, 6mm ................ 4
• Wrenches 8/10, 12/14, 17/19 ................ 3
• set screws M8-1.25 x 20 (Wings) ....... 6
• hex Bolts M8-1.25 x 25 (Wings) .......... 6
• handwheel Bushing (handwheel) ....... 1
• handwheel handle (handwheel) ......... 1
• hex nut M12-1.75 (handwheel) .......... 1
• Flat Washer 12mm (handwheel) ......... 1
• Key 4 x 4 x 10 (handwheel) ................. 1
• Flange Bolts M6-1 x 12 (dust hood) ... 6
Inventory
I]Z[daadl^c\^hVYZhXg^ei^dcd[i]ZbV^cXdbed"
cZcihh]^eeZYl^i]ndjgbVX]^cZ#AVni]ZXdbed"
cZcihdjiid^ckZcidgni]Zb#
>[ Vcn cdc"egdeg^ZiVgn eVgih VgZ b^hh^c\ Z#\# V
cjidgVlVh]Zg!lZl^aa\aVYangZeaVXZi]Zb0dg
[dgi]ZhV`Zd[ZmeZY^ZcXn!gZeaVXZbZcihXVcWZ
dWiV^cZYVindjgadXVa]VgYlVgZhidgZ#