Grizzly G4003 User Manual

Manual insert

Warning: no portion of this manual may be reproduced in any shape

or form Without the Written approval of grizzly industrial, inc.

#Cr10598 printed in ChinA

the Model g4002/g4003 lathe is shipped without oil. you must fill the headstock and apron with oil, and
complete the

lubrication procedures outlined in the maintenance section on page 27. if you run this

lathe without oil, even for a short period of time, drivetrain parts will be damaged and your lathe warranty
will be void. We recommend using iso 68 or a good grade non-detergent sAe 30W motor oil in your lathe.
Make sure to change the oil immediately after lathe break-in.

If you have any questions about this manual insert or machine lubrication and break-in, please contact
Grizzly Technical Support at (570) 546-9663 or email [email protected].

model g4002/g4003

gear head metal

lathe

manual insert

GEARBOXES MUST

BE FILLED WITH OIL!

NO OIL SHIPPED WITH

MACHINE!

Requires ISO 68

or Non-Detergent

SAE 30W Motor Oil.