Grizzly POWER FEED H8370 - Manual

Specifications
Motor.................................................. 110V.60Hz
Speed................................................ 0–270.RPM
Maximum.Torque..................................560.in./lb.
Bevel.Gear.to.Drive.Gear.Ratio................... 2.8:1
Inventory
Refer.to. Figure 1.and.the.table.below.to.inventory.
the.contents.of.the.shipping.box.
MODEL H8370
POWER FEED
FOR MILL/DRILLS
INSTRUCTIONS
CoPyRiGHT.©.MARCH,.2008.By.GRizzly.inDuSTRiAl,.inC..ReViSeD.july,.2011.(Bl)
WaRNINg: NO PORTION OF THIS MaNUaL May bE REPRODUCED IN aNy SHaPE
OR FORM WITHOUT THE WRITTEN aPPROvaL OF gRIzzLy INDUSTRIaL, INC.
(FoR.MoDelS.MAnuFACTuReD.SinCe.7/11).#TS10533..PRinTeD.in.TAiWAn
if. any. nonproprietary. parts. are. missing. (e.g.. a.
washer.or.a.spacer),.we.will.gladly.replace.them;.
or.for.the.sake.of.expediency,.replacements.can.
be.obtained.at.your.local.hardware.store.
&K'
'
(K'
)
*
+
-
,K'
Figure 1..Model.H8370.inventory.
REF PART # DESCRIPTION
1V2 PH8370001V2 MOUNTING ASSY W/O WIRES V2.07.11
2
PH8370002 GEAR SAFETY COVER
3V2 PH8370003V2 PWR FEED & LIMIT SWITCH ASSY V2.07.11
4
PH8370004 LIMIT STOP
5 PH8370005 LIMIT SWITCH BRACKET
6 PH8370006 LEADSCREW GEAR
7V2 PH8370007V2 RAPID SWITCH W/LED V2.07.11
8
PH8370008 ZYTEL GEAR
If you need help with your new power feed, call
our Tech Support at: (570) 546-9663.
Wear safety glasses dur-
ing the entire setup pro-
cess!