Navigating to security settings, Configuring security settings – Gateway 7001 Series User Manual
Page 92
87
www.gateway.com
Navigating to security settings
To set the security mode, click
Advanced > Security
on the Administration Web page. The
Modify security settings that apply to the internal network screen opens. Update the boxes as
described in the following section.
Configuring security settings
The following configuration information explains how to configure security modes on the
access point.
Keep in mind that each wireless client that wants to exchange data with the access point
must be configured with the same security mode and encryption key settings used on the
access point.
On a dual-band AP, these Security Settings apply to both radios.
Important
Security modes other than plain-text apply only to
configuration of the internal network. On the guest
network, you can use only plain-text mode. (For more
information about guest networks, see