Gateway 7001 Series - Manual (Page 78)

73 www.gateway.com
Configuring Guest interface Ethernet settings
To configure Ethernet (Wired) settings for the “Guest” interface, fill in the boxes as
described in the following table.
Updating settings
To apply your changes, click Update .
Field Description
MAC Address Shows the MAC address for the guest interface for this access point. This
is a read-only box that you cannot change.
VLAN ID If you choose to configure internal and guest networks by “VLANs”, this box
will be enabled.
Provide a number between 1 and 4094 for the guest VLAN.