Gateway 7001 Series - Manual (Page 79)

74 www.gateway.com
Configuring a wireless interface
Navigating to wireless settings
To set the wireless address for an access point, click Advanced > Wireless Settings on the
Administration Web page, and update the boxes as described in the following section.
Configuring the radio interface
The radio interface lets you set the radio Channel and 802.11 mode as described in the
following table.
Important The following illustration shows the Wireless settings page
for the dual band AP (Gateway 7001 802.11 A+G Wireless
Access Point). The
Administration Web page for the single
band AP (Gateway 7001 802.11 G Wireless Access Point)
will look slightly different.
Important On the dual band AP (Gateway 7001 802.11 A+G Wireless
Access Point), you must configure these radio interface
settings for both Radio Interface One and Radio Interface
Two.