Gateway 7001 Series - Manual (Page 69)

64 www.gateway.com
Signal Indicates the strength of the radio frequency (RF) signal the client receives
from the access point.
The measure used for this is an IEEE 802.1x value known as Received
Signal Strength Indication (RSSI), and will be a value between 0 and 100.
RSSI is determined by a an IEEE 802.1x mechanism implemented on the
network interface card (NIC) of the client station.
Utilization Utilization rate for this station.
For example, if the station is “active” (transmitting and receiving data) 90%
of the time and inactive 10% of the time, its “utilization rate” is 90%.
RxAve Indicates number of total packets received by the client during the current
session.
TxAve Indicates number of total packets transmitted to the client during this
session.
Error Rate Indicates the percentage of time frames are dropped during transmission
on this access point.
Field Description