Gateway 7001 Series - Manual (Page 73)

68 www.gateway.com
Configuring an Ethernet (wired) interface
Ethernet (Wired) Settings describe the configuration of your Ethernet local area network
( LAN )
Caution The Ethernet Settings, including Guest Access, are not
shared across the cluster. These settings must be
configured individually on the Administration pages for
each access point. To get to the Administration pages for
an access point that is a member of the current cluster,
click on its IP Address link on the Cluster > Access Points
page of the current AP. For more information about which
settings are shared by the cluster and which are not, see
“Which settings are shared in the cluster configuration and
which are not?” on page 43
.