5 access, 1 web interface, 2 troubleshooting – GE Industrial Solutions Digital Energy SNMP_WEB ADAPTER User Manual
Page 22: 3 further information, Access, Web interface, Troubleshooting, Further information
5 ACCESS
5.1 WEB INTERFACE
After the installation and configuration of the SNMP/Web adapter, the connection can be tested with a
web browser.
•
Launch the browser
•
Enter the URL of the SNMP/Web adapter: http://
•
When prompted, enter username and password (by default, these are set to ge and ge)
•
The SNMP/Web adapter home page will be shown
5.2 TROUBLESHOOTING
If no answer is received from the adapter, verify the adapter installation, cabling and network
configuration. Check the Ethernet connection to the adapter by launching a ping command from a
workstation in the same subnet.
E.g. in a Windows system:
•
Select Run from the Start menu
•
Enter ping
•
Verify that the SNMP Card adapter is correctly replying
5.3 FURTHER INFORMATION
For more information, and in order to make full use of all advanced functionalities provided by the
SNMP/Web adapter, refer to the Operating Manual available on the CD-ROM
Modifications reserved
Page 22/24
ISG_CNT_SNM_BAS_CRD_1GB_V012.doc
Installation Guide SNMP/Web Adapter