FieldServer LonWorks FS-8700-21 - Manual (Page 36)

FS-8700-21 LonWorks Manual Page 36 of 72
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
Appendix B.4. Honeywell Care
This system uses unacknowledged service as default. This protocol driver requires acknowledged service to
operate correctly.
Appendix B.5. CARE and LON PT link Integration
The procedure that follows describes a successful integration from a LonPtLink using Honeywell Care ver 7.0.
Set the PT Link configuration file as follows for LonWorks: Implicit, Update, Update.
Open the device library in Care and create a new Lon device as shown in the example below.
Connect to the Lon side of the PT Link using the Lon network interface cable and set Care to Onnet.