Client side node parameters, Client side map descriptor parameters – FieldServer LonWorks FS-8700-21 User Manual
Page 12
FS-8700-21 LonWorks Manual
Page 12 of 72
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
6.2.2 Client Side Node Parameters
Section Title
Nodes
Column Title
Function
Legal Values
Node_Name
Provide name for Node
Up to 32 alphanumeric characters
Protocol
Specify protocol used
LonWorks
Startup_Write
Initiate a send on startup. Refer to Appendix A.3 for more
information
Enabled, Disabled
Example
// Client Side Nodes
Nodes
Node_Name , Protocol
LON_1
, LonWorks
6.2.3 Client Side Map Descriptor Parameters
6.2.3.1 FieldServer Related Map Descriptor Parameters
Column Title
Function
Legal Values
Map_Descriptor_Name
Name of this Map Descriptor. (Network Variable
Name)
Up to 16 alphanumeric characters.
Data_Array_Name
Name of Data Array where data is to be stored
or fetched from in the FieldServer
One of the Data Array names defined in
Section 5
Data_Array_Offset
Starting location in Data Array
0 to (Data_Array_Length-1) as specified in
Section 5
Lon_Function
Detailed Function of Client Map Descriptor
See Section 6.1.2 for a list of valid entries for
Implicit Connections.
Function
Function of Client Map Descriptor
See Section 6.1.2 for a list of valid entries
based on the Lon_Function.