Fluke THE HART 1529 - Manual (Page 92)

• indicates a serial number is required.
• indicates a resistance value is required.
• indicates a voltage value is required.
• indicates a temperature unit is required.
• indicates a password is required.
• indicates a port number is required.
• indicates an eight character label is required.
• indicates a four digit number is required.
• indicates a one or two digit number is required.
• indicates a one or two digit number is required.
• indicates a one or two digit number is required.
• indicates a one or two digit number is required.
• indicates a one or two digit number is required.
• indicates a valid baud number is required.
8.4.1 Measurement Commands
The measurement commands are used to read information on the statistical cal-
culations and for reading the most recent measurement for a specified channel.
The measurement commands are not password protected.
8.4.1.1 CALCulate:AVERage:CLEar
Clears the statistical functions for all channels.
CALC:AVER:CLE
The *RST command clears the statistical functions.
8.4.1.2 CALCulate:AVERage:DATA?
Returns the value of a statistical calculation for a given channel.
CALC3:AVER1:DATA?
0.017
The CALCulate suffix, , specifies the channel (1 to 4). The AVERage
suffix, , specifies the calculation type. See Table 4 on page 122 for the Sta-
tistical Calculation Types.
8.4.1.3 CALCulate:AVERage:TYPE?
Returns the keyword for the specified field type number.
CALC:AVER2:TYPE
STD
1529 Chub-E4 Thermometer Readout
User’s Guide
86