3 calculate:convert:name? 94, 4 calculate:convert:name 94, 5 calculate:convert:parameter:catalog? 94 – Fluke THE HART 1529 User Manual
Page 100: Calculate:convert:name, Calculate:convert:name :convert:parameter:catalog
This command may be password-protected. To access this command:
• If the SYST:PASS:CONV? command returns a 0 (probe password-protec-
tion is disabled), the password is not required.
• If the SYST:PASS:CONV? command returns a 1 (probe password-protec-
tion is enabled), the password must be successfully entered using the
SYST:PASS:CEN
mands).
8.4.4.3
CALCulate
Returns the name of the selected conversion type for the specified channel.
CALC2:CONV:NAME?
ITS
The CALCulate suffix,
nel (5 to 14). The conversion types and their names are listed in Table 7 on
page 124.
8.4.4.4
CALCulate
Sets the conversion type for the specified channel.
CALC2:CONV:NAME CVD
The CALCulate suffix,
nel (5 to 14). The
type. The acceptable conversion types depend on the channel type. The conver-
sion types and their names are listed in Table 7 on page 124.
This command may be password-protected. To access this command:
• If the SYST:PASS:CONV? command returns a 0 (probe password-protec-
tion is disabled), the password is not required.
• If the SYST:PASS:CONV? command returns a 1 (probe password-protec-
tion is enabled), the password must be successfully entered using the
SYST:PASS:CEN
mands).
8.4.4.5
CALCulate
Returns the names of the probe characterization parameters associated with the
current conversion type for the specified channel.
CALC2:CONV:PAR:CAT?
“RANGE”,”RTPW”,”A4”,”B4”,”A”,”B”,”C”,”D”
The CALCulate suffix,
nel (5 to 14). Each item in the response list is enclosed in double-quotes and
separated from other items by a comma. Each item indicates the name of a
characterization parameter for the current conversion type.If there are no pa-
1529 Chub-E4 Thermometer Readout
User’s Guide
94