19 logging:demand:print [|all [,]] 108, 20 logging:demand:store 108, 21 logging:demand:value? |min|max|def 108 – Fluke THE HART 1529 User Manual
Page 114: 22 logging:label:name? 108, Logging:demand:print [|all [,|min|max|def, Logging:label:name

LOG:DEM:POIN?
21
Specifying the MAX parameter returns the total number of entries that can be
stored in the demand log.
8.4.7.19
LOGging:DEMand:PRINt [
Prints the demand log entries.
LOG:DEM:PRIN 23,1
DATA_23 1 22.862C 14:59:43 09-05-00
DATA_23 2 9.963 KO 14:59:44 09-05-00
DATA_23 3 23.097C 14:59:45 09-05-00
DATA_23 4 23.202C 14:59:46 09-05-00
If no parameters are specified, the ALL parameter is assumed and all demand
log entries are printed to the serial port. Specifying the
only the log entries with the specified label number to the serial port. Op-
tionally, the log entries may be printed to a specific port by specifying the
8.4.7.20
LOGging:DEMand:STORe
Stores the current measurement into the demand log.
LOG:DEM:STOR
If simultaneous scan mode is enabled, one reading is stored in the log for each
enabled channel.
8.4.7.21
LOGging:DEMand:VALue?
Returns the specified demand log entry.
LOG:DEM:VAL? 10
DATA_25,2,9.961,KO,14,59,35,2000,9,5
The
ther the MIN or DEF parameter returns the first entry in the demand log. Spec-
ifying the MAX parameter returns the last entry in the demand log. Each entry
in the demand log consist of the label, channel number, measurement value,
scale, time and date.
8.4.7.22
LOGging:LABel
Returns the name of the specified label.
LOG:LAB18:NAME?
DATA_18
1529 Chub-E4 Thermometer Readout
User’s Guide
108