Fluke THE HART 1529 - Manual (Page 85)

Command Description Refer To
*CLS Clears the status registers Section 8.4.12
*ESE? Returns the Event Status Enable Register Section 8.4.12
*ESE |MIN|MAX|DEF Sets the Event Status Enable Register Section 8.4.12
*ESR? Returns the Event Status Register Section 8.4.12
*IDN? Returns the instrument identification string that indicates
the manufacturer, model number, serial number, and firm-
ware version Section 8.4.8
*OPT? Returns a list of installed input card types Section 8.4.8
*RST Sets the instrument operating parameters to defined
conditions Section 8.4.8
*SRE? Returns the Service Request Enable Register Section 8.4.12
*SRE |MIN|MAX|DEF Sets the Service Request Enable Register Section 8.4.12
*STB? Returns the Status Byte Register Section 8.4.12
*TST? Performs a self-test and reports any errors that are found Section 8.4.12
CALCulate:AVERage:CLEar Clears the statistical functions for all channels Section 8.4.1
CALCulate:AVERage:DATA? Returns the value of a statistical calculation for the speci-
fied channel Section 8.4.1
CALCulate:AVERage:TYPE? Returns the keyword for the specified calculation type
number Section 8.4.1
CALCulate:CONVert:CATalog? Returns a list of conversion types available for the speci-
fied channel Section 8.4.4
CALCulate:CONVert:COPY|ALL Copies the conversion type, sub-ranges (ITS-90), serial
number, and characterization coefficients from one chan-
nel to another Section 8.4.4
CALCulate:CONVert:NAMe? Returns the name of the selected conversion type for the
specified channel Section 8.4.4
CALCulate:CONVert:NAMe Sets the conversion type by name for the specified
channel Section 8.4.4
CALCulate:CONVert:PARameter:CATalog? Returns the names of the probe characterization parame-
ters used with the selected conversion type for the speci-
fied channel Section 8.4.4
CALCulate:CONVert:PARameter:VALue?
[|ALL] Returns the value for the specified or All conversion pa-
rameters for the specified channel Section 8.4.4
CALCulate:CONVert:PARameter:VALue
,[,< param>,...] Sets the value of one or more conversion parameters for
the specified channel number Section 8.4.4
CALCulate:CONVert:PRINt [|ALL [,]] Returns the conversion parameters for the specified
channel Section 8.4.4
CALCulate:CONVert:SNUMber? Returns the probe serial number for the specified channel Section 8.4.4
CALCulate:CONVert:SNUMber Sets the probe serial number for the specified channel Section 8.4.4
CALCulate:CONVert:TEST? | Tests the temperature conversion for the specified channel Section 8.4.4
79
8 Digital Communications Interface
Interface Commands
Table 3 Alphabetical List of Commands