FUJITSU MHW2120BS - Manual (Page 227)

5.3 Host Commands
(42) WRITE SECTOR (S) EXT (X’34’)
•
Description
This command is the extended command of the WRITE SECTOR (S) command.
The LBA specification is increased from 28 bits to 48 bits, and the maximum
number of sectors that can be transferred by a single command is changed from
100h to 10000h. Other command controls are the same as those of the WRITE
SECTOR (S) command.
•
Error reporting conditions
(1) The command was issued in CHS mode (ST = 51h, ER = 04h).
The other error reporting conditions are the same as those of the WRITE
SECTOR(S) command.
At command issuance (Shadow Block Registers setting contents)
CM 0 0 1 1 0 1 0 0
DH 1 L 1 x xx
CH EXP
CH
CL EXP
CL
SN EXP
SN
SC EXP
SC
FR EXP
FR
LBA (47-40)
LBA (23-16)
LBA (39-32)
LBA (15-8)
LBA (31-24)
LBA (7-0)
Sector count (15-8)
Sector count (7-0)
xx
xx
At command completion (Shadow Block Registers contents to be read)
ST Status information
xx
CH EXP
CL EXP
CL
SN EXP
SN
ER
LBA (39-32)
SC EXP
SC
LBA (23-16)
LBA (15-8)
LBA (7-0)
xx
xx
DH
CH
LBA (47-40)
LBA (31-24)
Error information
1 L 1 x
C141-E249 5-153