FUJITSU MHW2120BS - Manual (Page 165)

5.3 Host Commands
Host
Reg. HD
PIO Setup
PIO Setup
PIO Setup
Data (1sector)
Data
(4 sectors)
Device
Data
(4 sectors)
Block
Block
Partial
Block
Figure 5.12 Execution example of READ MULTIPLE command
•
Error reporting conditions
(3) An uncorrectable disk read error occurred (ST = 51h, ER = 40h).
(1) A specified address exceeds the range where read operations are allowed
(ST = 51h, ER = 10h).
(2) The range where read operations are allowed will be exceeded by an address
during a read operation (ST = 51h, ER = 10h).
(4) The sync byte indicating the beginning of a sector was not found
(ST = 51h, ER = 01h).
(5) The READ MULTIPLE command is disabled (ST = 51h, ER = 04h).
(6) A SATA communication error occurred (ST = 51h, ER = 0Ch).
(7) An error other than the above errors occurred (ST = 51h, ER = 04h).
C141-E249 5-91