FUJITSU MHW2120BS User Manual
Page 183

5.3 Host Commands
Bits 1-0: Reserved
*2 Word 1, 3, 6, 60-61
Word MHW2120BS MHW2100BS MHW2080BS MHW2060BS MHW2040BS
1 X’3FFF’ X’3FFF’ X’3FFF’ X’3FFF’ X’3FFF’
3 X’10’ X’10’ X’10’ X’10’ X’10’
6
X’3F’
X ’3F ’
X’3F’
X’3F’
X’3F’
60-61 X’DF94BB0’ X’BA52230’ X’950F8B0’ X’6FC7C80’ X’4A85300’
*3 Status of the Word 2 Identify information is shown as follows:
37C8h
The device requires the SET FEATURES sub-command after the
power-on sequence in order to spin-up. The Identify information
is incomplete.
8C73h
The device requires the SET FEATURES sub-command after the
power-on sequence in order to spin-up. The Identify information
is incomplete.
C837h
The device requires the SET FEATURES sub-command after the
power-on sequence in order to spin-up. The Identify information
is incomplete.
Others Reserved
*4 Word 49: Capabilities
Bits 15-14: Reserved
Bit 13:
Standby timer value. ATA spec is '1.'
Bit 12:
Reserved
Bit 11:
'1' = IORDY supported
Bit 10:
'1' = IORDY inhibition supported
Bit 9:
'1' = DMA supported
Bit 8:
'1' = LBA supported
Bits 7-0: Undefined
C141-E249
5-109