FUJITSU MHW2120BS - Manual (Page 216)

Interface
•
SET MAX FREEZE LOCK (Features Field = 04h)
The Set MAX FREEZE LOCK command sets the device to SET_MAX_Frozen
state.
After the device made a transition to the Set Max Freeze Lock state, the following
SET MAX commands are rejected, then the device returns command aborted:
− SET MAX ADDRESS
− SET MAX SET PASSWORD
− SET MAX LOCK
− SET MAX UNLOCK
(1) The device is in Set Max Locked mode or Set Max Freeze Locked mode
(ST = 51h, ER = 04h).
At command issuance (Shadow Block Registers setting contents)
− SET MAX FREEZE LOCK
•
Error reporting conditions
(2) A SATA communication error occurred (ST = 51h, ER = 14h).
CM 1 1 1 1 1 0 0 1
DH x x x x xx
CL
SN
FR
xx
xx
xx
CH
SC
xx
04
At command completion (Shadow Block Registers contents to be read)
ST Status information
DH
CH
CL
SN
xx
SC
ER
xx
xx
xx
xx
Error information
5-142 C141-E249