FujiFilm FINEPIX EX3.1 User Manual

Page 35

1. Click the [Update menu] button in FinePixViewer.

2. The “Input of User ID” dialog box

appears. Enter the user ID and
password set during user
registration and then click the [OK]
button to update the Internet
menu.

☞ If you are not already connected to the

Internet, the software automatically attempts
to connect (for dial-up connections).

• If you tick the “Click here to save your password” checkbox, you will not need to enter

your password next time.You may need your user ID and password. Make sure you
do not forget them.

• As well as the Internet menu being updated, related information pages may also be

opened. Because these pages may contain good news or useful information, you
should update the Internet menu frequently.

3. Click the menu button for the service you want to use.

☞ If you are not already connected to the Internet, the software automatically

attempts to connect (for dial-up connections).

☞ Operation after you click the menu button differs depending on the button you

click. For instance, you may jump to your service provider’s web site or an
upload dialog box may open.

✽

The actual Internet menu may differ slightly in appearance from the sample
shown here.

Move the mouse cursor over an Internet menu button to view information about the
service.

4. When you have finished using the Internet services,

disconnect from the Internet (for dial-up connections).

The connection speed will vary significantly depending on the quality of your phone line
and the amount of traffic on the server to which you are connected.

NOTE

TIP

Using the Services

4. When the browser starts up, proceed as directed by the

on-screen instructions.

5. Enter the required information in the user registration page.

1 Enter the name of your choice (nickname, etc.).
2 Enter a password of your choice using letters and/or numbers. Then enter the

password again for confirmation.

3 Enter your name.
4 Enter your e-mail address.
5 Enter the remaining required information.

✽

After you register, a confirmation e-mail message is sent to you. Be sure to enter
a valid e-mail address at which you can receive the message.

✽

The actual user registration page may differ slightly in appearance from the
sample shown here.

6. When you have entered all the required information, click the

[Registration] button at the bottom of the page.

Once you complete the registration, a confirmation e-mail is sent.
Wait a few moments until the message is sent.

●