Panasonic Lumix G100 Mirrorless Camera with 12-32mm Lens - Manual (Page 59)

59
3. Basic Operations
Viewfinder
With information
Without
information
With information
+
level gauge
Without
information
+
level gauge
60 p 60 p
• You can switch the viewfinder/monitor display method:
[ ] [ ] [LVF/Monitor Disp. Set] (  345 )
Using the level gauge
The yellow line indicates the current angle. Correct the angle of the
camera so that it matches the white line.
Horizontal
Vertical
Green (no tilt)
• Even after correcting the tilt, there may still be an error of approx. ±1°.
• When the camera is tilted significantly upwards or downwards, the level
gauge may not be displayed correctly.
• You can adjust the level gauge and reset the adjusted values in [Level
Gauge Adjust.] in the [Setup] menu. (

359 )