Panasonic Lumix G100 Mirrorless Camera with 12-32mm Lens - Manual (Page 370)

370
13. Menu Guide
Entering Characters
Follow the steps below when the character entry screen is displayed.
1
Enter characters.
●
Press to select characters
and then press
until the
character to enter is displayed.
(Repeat this)
• To repeatedly enter the same character,
rotate or to the right to move the
entry position cursor.
• If you select an item and press , you can perform the following operations:
– [ ]: Change the character type to [A] (upper case characters), [a] (lower
case characters), [1] (numbers), and [&] (special characters)
– [ ]: Enter a blank
– [Delete]: Delete a character
– [ ]: Move the entry position cursor to the left
– [ ]: Move the entry position cursor to the right
2
Complete entering.
●
Select [Set] and then press .
• A maximum of 30 characters can be entered (maximum of 9 characters
when setting names in [Face Recog.]).
• A maximum of 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ]
(maximum of 6 characters when setting names in [Face Recog.]).