Panasonic Lumix G100 Mirrorless Camera with 12-32mm Lens User Manual
Page 150
150
6. Focus/Zoom
• On the recording screen, you can rotate the focus ring to display the MF
Assist screen. If the focus ring has been rotated to enlarge the display, the
assist screen will be exited a certain amount of time after you cease the
operation.
• The recording distance reference mark
is a mark used to measure the recording
distance.
Use this when taking pictures with
manual focusing or taking close-up
pictures.
• When using an interchangeable lens with no focus ring and in the following
cases, manual focus operations may not be possible during recording if the
shutter speed is very slow.
– [
] mode (When [Exposure Mode] is set to [M])
– [
] mode (When [S&Q Exposure Mode] is set to [M])
(When using an interchangeable lens with a focus ring, you can do manual
focus operations, but autofocus does not work during manual focus.)
• MF Assist and MF Guide may not display depending on the lens used. You
can, however, display MF Assist by directly operating the camera using the
touch screen or a button.
• You can memorize the MF Assist position separately for vertical and
horizontal orientations:
[
]
[
]
[Focus Switching for Vert / Hor] (
)
• You can set the movement of the MF Assist position to loop:
[
]
[
]
[Loop Movement Focus Frame] (
• You can change the display method of the magnified screen:
[
]
[
]
[MF Assist] (
)
• You can disable focus ring operation:
[
]
[
]
[Focus Ring Lock] (
• You can change the Focus Peaking sensitivity and the display method:
[
]
[
]
[Peaking] (
)
• You can change the MF Guide display:
[
]
[
]
[MF Guide] (
• The camera memorizes the focus point when you turn it off:
[
]
[
]
[Lens Position Resume] (
)