PLANET VIP-191 - Manual (Page 21)

Figure 12. AP connection status
8. At this point, pressing the OK Key will bring the phone back to Normal Mode, displaying the
Main Screen with the newly obtained IP address on the top left corner and the middle of the
screen.
IP Address Info
When the phone is in Normal Mode, the screen should display the IP address on the top left corner of
the screen. (It will also be displayed in the middle of the screen, if the phone is not connected to a SIP
server).
Another way to display the IP address in a more detailed fashion is as follows:
1. Click the Left Key and select AP Connection.
2. Press the Left (“Menu”) Key and select “IP Info”.
3. A screen with more detailed IP information will then be displayed, as shown below:
Figure 13. IP information
4. Press the Right (“Renew”) Key will attempt to refresh the screen with a new IP address,
(though a new IP address may not be guaranteed.) The settings of IP Address, Subnet Mask,
and Default Gateway will temporarily be set to 0.0.0.0 and they will then be refreshed with the
new information.
21