Appendix a, Voice communications – PLANET VIP-191 User Manual

Page 109

Appendix A

Voice Communications

The chapter shows you the concept and command to help you configure your smart Wi-Fi Phone

through sample configuration. And provide instruction to make calls to desired destination in Wi-Fi

Phone. In this section, we’ll lead you step by step to establish your first voice communication via

keypad operations.

Peer To Peer (P2P) mode

Figure 189. Topology of instruction example - P2P mode

Step 1: Assuming there are two VIP-191 in the network the IP address are 172.0.0.11 and 172.0.0.12

Step 2: Press the Dial Key of VIP-191_A.

Step 3: Enter the IP address of VIP-191_B (as shown below). Enter the ‘.’ in the IP address, press the

‘*’ Key twice.

Figure 190. Making a call - Entry the IP address

Step 4: Press the Right Key (“Dial”) to dial out, and the status of the screen will be shown as “Ringing”,

as shown in the following diagram:

109