Kyocera Brigadier - Manual (Page 85)

Web and Data 74
Note: Wi-Fi networks are self-discoverable, which means no additional steps are required for
your phone to connect to a Wi-Fi network. It may be necessary to provide a user name
and password for certain closed wireless networks.
Check the Wireless Network Status
Check the status of your current wireless network, including speed and signal strength, through
the Wi-Fi settings menu.
1. From the Home screen, tap > Settings > Wi-Fi.
2. Tap the wireless network that the phone is currently connected to. You will see a
message box showing the Wi-Fi network name, status, speed, signal strength, and other
details.
Note: If you want to remove the phone’s wireless network settings, tap Forget on this window.
You need to enter the settings again if you want to connect to this wireless network.
Connect to a Different Wi-Fi Network
Use the Wireless & networks settings menu to scan for and connect to a different Wi-Fi network.
1. From the Home screen, tap > Settings > Wi-Fi.
 Detected Wi-Fi networks are displayed in the Wi-Fi networks section. To manually
scan for available Wi-Fi networks, tap > Scan.
2. Tap another Wi-Fi network to connect to it.
Note: If the wireless network you want to connect to is not in the list of detected networks, tap
. Enter the wireless network settings and tap Save.
The Wi-Fi Settings Menu
The Wi-Fi settings menu lets you turn Wi-Fi on or off, set up and connect to available Wi-Fi
networks, and configure advanced Wi-Fi options.
► From the Home screen, tap
> Settings > Wi-Fi.
 Select the Show Wi-Fi pop-up check box to notify you that Wi-Fi is available when
you launch apps.
 Tap
to set up a Wi-Fi Protected Setup connection by pressing the set up button
on the router.
 Tap to add a new Wi-Fi network.
 Tap for the following menus: