Call numbers with pauses – Kyocera Brigadier User Manual
Page 41
Phone Calls
30
2. Tap 911 > Call.
To call the 911 emergency number when the screen is locked:
1. Tap Emergency call on the screen.
2. Tap 911 > Call.
Once an emergency call is placed, your phone will be in Emergency mode for the following five
minutes after the call where non-emergency calls cannot be made.
To exit Emergency mode immediately:
► Press
> Exit Emergency mode > Yes.
Enhanced 911 (E911) Information
This phone features an embedded Global Positioning System (GPS) chip necessary for utilizing
E911 emergency location services where available.
When you place an emergency 911 call, the GPS feature of your phone seeks information to
calculate your approximate location. Depending on several variables, including availability and
access to satellite signals, it may take up to 30 seconds or more to determine and report your
approximate location.
Important:
Always report your location to the 911 operator when placing an emergency call.
Some designated emergency call takers, known as Public Safety Answering
Points (PSAPs), may not be equipped to receive GPS location information from
your phone.
Call Numbers with Pauses
You can dial phone numbers with pauses for use with automated systems, such as Voice Mail
or credit card billing numbers.
There are two types of pauses available on your phone:
●
Add 2-sec pause: Automatically sends the next set of numbers after two seconds.
●
Add wait: Sends the next set of numbers when you tap Yes in the pop-up window.
1. From the Home screen, tap Phone > Dialpad.
2. Enter all or part of a number.
3. Tap > Add 2-sec pause or Add wait.
4. Enter additional numbers.
5. Tap Call to dial the number.