Brother Fax-700 - Manual (Page 92)

5. ADVANCED USES
4) Press STARTs and the machine will transmit automatical­
ly-
0 5 2 8 2 4 2 8 6 4
S E N D I N G
5) When the document has been transmitted, the unit at the
receiving station rings.
0 5 2 8 2 4 2 8 6 4
C A L L I N G
6) If the receiving party answers, your fax unit will also ring.
7) Pick up the handset and have your telephone conversation.
- If the receiving party does not pick up and you selected
Call Back Message "ON" then it will be sent.
- If you have not registered your telephone number as part
of the station ID, you cannot send a Call Back Message.
- If an error occurs during the transmission of the fax, the
call reservation function will not operate.
- There are certain types of fax machine that will not
respond to the Call Reservation function.
- The Call Reservation function is cancelled during auto
redialing. If you turn ON the Call Back Message, however,
the unit will send the message after sending the document.
- You cannot use Call Reservation with the timer, polling,
confidential or broadcast (FAX-800M only) functions.
- If ypu turn ON the Call Reservation function and then set
up a Timer (delayed) transmission, the Call Reservation
will be cancelled.
0 5 2 8 2 4 2 8 6 4
C A L L P I C K U P
Printing out a Cali Back Message
You can print out a sample Call Back Message as follows.
1) Press the FUNCTION key. A message will prompt you to
use the cursor keys to scroll through the functions manual­
ly. Scrolling will begin automatically after two seconds.
U S E < > T O S C R O L L .
E N T E R N 0 . & S E T K E Y
5-12