Brother Fax-700 - Manual (Page 82)

ADVANCED USES
Multiple resolution transmissions
You can also select a setting for each page of a multiple page
transmission. This may be necessary if you are sending some
pages that include graphics^ others with photographic
images^ and others which consist only of text. Follow the pro­
cedure below to set the resolution for a document with more
than one page.
1) Set the documents face down in the feeder.
2) Press the CURRENT SETTING key. A message will
prompt you to use the cursor keys to scroll through the
functions manually. Scrolling will begin automatically af­
ter two seconds.
U S E < > T O S C R O L L
E N T E R N O . & S E T K E Y
3) Press 2.
2 . R E S O L U T I O N
P R E S S S T O P T O C A N C E L
4) Press SET to confirm your selection. You will be prompted
to select a resolution setting.
P A G E 0 1 : S T A N D A R D
S E L E C T < > & S E T K E Y
5) Use the cursor keys (< >) to select the setting you want to
use.
6) Press SET. If the document is more than one page long/
you will be prompted to make settings. Press SET to con­
firm the setting you have made for each page. Press STOP
when you have finished making these resolution settings.
7) Select the fax number in the usual way and press the
START key. Your document will be sent at the specified
resolutions.
P A G E 0 2 : F I N E
S E L E C T < > & S E T K E Y
F A X : E N T E R N 0 . & S T A R T
C O P Y P R E S S C O P Y K E Y
Once the transmission has been completed/ the unit wiU
revert to STANDARD resolution mode. None of the resolu­
tion LEDs will be lit.
- The super COVERPAGE and Call Back Messages are not
counted when determining the page number for scanning
resolution.
5-2