■ setting up, Settingup, Setting up – Brother Fax-700 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3.
■
SETTING UP
Plit:
1. SELECTING A LOCATION FOR YOUR FAX MACHINE
The following points should be kept in mind when selecting a place to set up your fax machine.
• Place the fax machine on a flat, stable surface such as a desk or stand.
• Select a place where the machine will not be subjected to bumping or exces
sive vibration.
• Do not stt it up in
a
high-traffie area.
• Locate the unit near a telephone wall jack and a standard grounded outlet.
•
Avoid setting up the machine near heaters, air conditioners, water, chemicals
or refrigerators.
• Avoid direct sunlight, excessive heat, moisture, or dust.
• Do not connect the unit to electrical outlets controlled by wall switches or au
tomatic timers. Disruption of power can wipe out information in the unifls
page memory. (FAX-800M only)
• Do not connect the unit to electrical outlets on the same circuit as large appli
ances and other equipment that might disturb the power supply.
• Avoid interference sources, such as speakers or the base units of cordless tele
phones.
• Be sure to disconnect the handset when moving the unit.
3-1