Brother Fax-700 - Manual (Page 19)

1.
J
PRELIMINARY INFORMATION
STANDARD TELEPHONE AND FCC NOTICES
(Only applies to 120V model)
These notices are in effect on models sold and used in America.
This equipment is hearing-aid compatible.
When programming emergency numbers and/or making test calls to emergency
numbers:
• Remain on the line and briefly explain to the dispatcher the reason for the call before
hanging up.
• Perform such activities in the off-peak hours, such as early morning or late evening.
This equipment complies with Part 68 of the FCC Rules. On the rear panel of this equipment is
a label that contains, among other information, the FCC Registration Number and Ringer
Equivalence Number (REN) for this equipment. You must, upon request, provide this informa­
tion to your telephone company.
You may safely connect this equipment to the telephone network by means of the standard
modular jack, USOC RJllC.
The REN is useful to determine the quantity of devices you may connect to your telephone line
and still have those devices ring when your telephone number is called. In most, but not all
areas, the sum of the RENs of all devices connected to one line should not exceed five (5). To be
certain of the number of devices you may connect to your line, as determined by the REN, you
should contact your local telephone company to determine the maximum REN for your calling
area.
If your IntelliFAX 700/800M causes harm to the telephone network, the telephone company
may discontinue your service temporarily. If possible, they will notify you in advance. But if
advanced notice is not practical, you will be notified as soon as possible. You will be informed
of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment, operations or proce­
dures that could affect the proper functioning of your equipment. If they do, you will be noti­
fied in advance to give you an opportunity to maintain uninterrupted telephone service.
If you experience trouble with this IntelliFAX 700/800M, please contact the manufacturer's
authorized service agency for information on obtaining service or repair. The telephone com­
pany may ask that you disconnect this equipment from the network until the problem has been
corrected or until you are sure that the equipment is not malfunctioning.
If you are not able to solve a problem with your fax machine, contact Brother service personnel
at 1-800-284-4 FAX. (U.S.A. Only).
-
continue -
1-3