Brother Fax-700 - Manual (Page 47)

TAD mode
4. BASIC USES
You also have the option of operating your fax unit via an
external TAD. In order to do enable this mode, press the
AUTO ANS key until both the AUTO ANS and F/T LED are
lighted.
AUTO ANS
TAD
F/T
Registering a Remote Activation/Deactivation Code
Use the following procedure to register a Remote Activation/
Deactivation code.
1) Press the FUNCTION key. A message will prompt you to
use the cursor keys to scroll through the functions manual­
ly. Scrolling will begin automatically after two seconds.
2) Press 6
.
U S E < > T O S C R O L L
E N T E R N O . & S E T K E Y
5 . S E C U R I T Y F U N C T I O N
P R E S S S T O P T O C A N C E L
3) Press SET to confirm your selection. The secondary func­
tions for this item will be scrolled two at a time on the LCD
until a selection is made.
l . F A X R E M O T E C O D E
2 . S E T R E C E I V E P A S S W O R D
4) Press 1.
l . F A X R E M O T E C O D E
P R E S S S T O P T O C A N C E L
5) Press SET and use the cursor keys to turn this function ON
or OFF.
R E M O T E A C T I V A T I O N : O N
S E L E C T < > & S E T K E Y
6) Make your selection, then press SET. If you have turned
the function ON, either press SET to use the current set­
ting, or use the number keys to enter the three-digit remote
activation code.
7) Press SET to register the three-digit code. Use the number
keys to enter the three-digit remote deactivation code or
press SET to use the current setting.
8) Press SET to register the deactivation code. The current
and following secondary functions will appear on the LCD.
Press a number key if you want to continue to set up secu­
rity functions. If you want to exit operations at this point,
press STOP.
R E M O T E A C T . C O D E 1 5 1
E N T E R & S E T K E Y
R E M O T E O E A C T . C O D E : # 5 1
E N T E R & S E T K E Y
l . F A X R E M O T E C O D E
2 . S E T R E C E I V E P A S S W O R D
4-13