Brother Fax-700 - Manual (Page 83)

Sm ADVANCED USES
- Any pages for which you did not set a resolution will be
transmitted at the same resolution as the last page for
which you did set a resolution.
The resolution of in-coming documents
The resolution used when receiving fax transmissions will
depend entirely on the capabilities of the fax machine from
which the document was transmitted and the settings
selected when the document is sent. Your fax machine can
receive and print documents in three modes: STANDARD,
FINE and SUPERFINE. The mode being used to print the
document (or the current page) is indicated by the LEDs.
The photo LED is not lit when docunaents are transmitted
from a remote station in PHOTO mode.
Copier resolution
You can use the convenience copier in SUPERFINE or
PHOTO modes. However, you can only use a single mode for
each copy operation. Pages of a document that are to be cop­
ied at a resolution that differs from the other pages must be
loaded and copied separately.
Set the document in the feeder. Select a mode by pressing the
RESOLUTION key, and then press the COPY key. If you
make a copy without having first selected a resolution, the
machine will automatically copy using SUPER FINE mode.
The SUPER FINE LED will come on to show that this mode is
being used.
Once the copy operation has been completed, the unit will
revert to standard resolution mode. None of the resolution
LEDs will be lit.
- To make multiple copies using a resolution other than
standard, select a resolution setting using the CURRENT
SETTING key or RESOLUTION key.
5-3