Registering speed-dial numbers, Using speed dial numbers – Brother Fax-700 User Manual

Page 71

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

4. ^ BASIC USES

USING SPEED DIAL NUMBERS

In addition to one-touch numbers you can also store another
hundred on the FAX-800M and forty on the FAX-700 fax or

telephone numbers that you can access using two-number
combinations - these are known as speed dial numbers. To
dial one of these numbers you simply press the

SPD. DIAL

key followed by the appropriate two-digit speed dial num

bers, and the machine dials the number you require. Speed

dial numbers are numbered 01 to 00 on the FAX-800M, and

01-40 on the FAX-700 (Even if the first digit is 0 you must
press it when accessing the number - you cannot just press
the

SPD. DIAL

key + the

key to call up the speed dial num

ber 01.)

Registering speed-dial numbers

To store a fax number as a speed dial number proceed as fol
lows.

1) Press the

FUNCTION

key. A message will prompt you to

use the cursor keys to scroll through the functions manual
ly. Scrolling will begin automatically after two seconds.

USE < > TO SCROLL

ENTER NO. & SET KEY

2) Press

3.SET AUTO DIAL

PRESS STOP TO CANCEL

3) Press

SET

to confirm your selection. The secondary func

tions for this item will be scrolled two at a time on the LCD
until a selection is made.

1.SETUP ONE-TOUCH DIAL

2.SETUP SPEED-DIAL

4) Press

2.SETUP SPEED-DIAL

PRESS STOP TO CANCEL

5) Press

SET,

then enter the two-digit combination you want

to register.

SETUP SPEED-DIAL : #_

ENTER & SET KEY

4-37

This manual is related to the following products:

Fax-800