ITC Hemochron Signature Elite Whole Blood Microcoagulation System - Manual (Page 78)

78
Verification of Barcode Scanner
Check the barcode scanner by scanning a test barcode.
To Test the Barcode Scanner:
1. Press PRINT/SCAN to display the Print menu:
2. Press 7 to display the second page of the Print menu:
3. Press 3 to test the scanner:
4. Position the scanner port (see page 5) approximately four inches from the barcode label that is
shown below:
Note: The barcode shown above is formatted as Code 128.
5. Press PRINT/SCAN. The characters that are read from the barcode are displayed in the screen:
6. Verify that test1234567890abcdefgxyztest is displayed.
7. Press CANCEL three times.