ITC Hemochron Signature Elite Whole Blood Microcoagulation System - Manual (Page 13)

13
SPECIFICATIONS
Specifications for the HEMOCHRON Signature Elite Whole Blood Microcoagulation System are listed below.
Dimensions and Weight
Depth 9.4 cm (3.7 in)
Width 19 cm (7.5 in)
Height 5 cm (2.0 in)
Weight 0.53 kg (1.2 lbs)
Performance
Test Precision ≤ 10% C.V. for whole blood samples
Operation
Test Chamber 1
Timing Range 0 second to 1005 seconds
Incubation Temperature 37 °C ±1.0 °C
Incubation Warm-Up Time 30 seconds to 90 seconds
Full-Charge Operating Time > 2 hours
Battery Life 500 recharges
Battery Type Lithium Ion
Throughput (Full Charge) 49 test cycles (at 150 sec per test)
17 test cycles (> 500 sec per test)
Operating Environment 15 °C to 30 °C
AC/DC Power Module
Input Power 100 to 240 VAC, 50 to 60 Hz
Output Power 12.0 VDC, 3.5 Amps (42 Watts, 144 BTU/hr) minimum
Barcode Reader
Supported Barcode Formats UPC/EAN, Code 128, Code 39, Trioptic Code 39,
Code 93, Interleaved 2 of 5, Discrete 2 of 5, Codabar,
and MSI Plessey
Laser Class IEC 60825-1 class 1 or class 2 laser product complies with
21 CFR 1040.10 and 1040.11 except for deviations pursuant
to Laser Notice No. 50 dated June 24, 2007.
Laser Wavelength Class 1: 630-670 nm
Class 2: 630-670 nm
Laser Power(peak) Class 1: 0.7mW @peak
Class 2: 1.5 -1.9 mW @peak
Calibration
The Signature Elite instrument is calibrated at the manufacturing facility to test and verify all functions. The
instrument is also self-calibrating, as all instrument functions are continuously monitored and verified by the
instrument software when a test is performed. The instrument does not require additional calibration by the
user.
For Class 2 Laser Instruments:
CAUTION:
CLASS 2 LASER RADIATION WHEN OPEN. DO NOT STARE INTO THE BEAM.
CAUTION: This manual provides safety instructions for instruments equipped with class 1 or class 2
barcode scanner lasers. Please refer to the back panel of the instrument to identify the class of laser
and follow appropriate instructions provided in this manual.