Brother FAX-940 E-mail - Manual (Page 96)

86
C H A P T E R N I N E
Turn Fax Storage ON––Press 6 .
Turn Fax Storage OFF––Press 7 . Only possible if there are no faxes in
memory or all faxes have been erased (by using Remote Control
9 6 3 ).
Retrieve a Fax
Press 9 6
then to
Print a Memory Status List––Press 1 , then enter the number of remote
fax machine and the # # , After the beep, hang up and wait.
Retrieve all faxes––Press 2 , then enter the number of remote fax
machine and the # # , After the beep, hang up and wait.
Erase all fax messages––Press 3 . If the fax data in memory has been
printed before, it will be printed first, and then erased.
Check the Receiving Status
Press 9 7
then for
Fax messages––Press 1 .
1 Long Beep––Received messages.
3 Short Beeps––No messages.
Change Answer Mode
Press 9 8
then for
TAD––Press 1 .
F/T––Press 2 .
FAX––Press 3 .
Exit Remote Operation
Press 9 0