Brother FAX-940 E-mail - Manual (Page 108)

98
C H A P T E R T E N
Programming the Paging Number
1 Press Menu , 8 , 6 .
2 Press Z or X until the screen displays
PAGING
3 Press Set . The screen prompts you to enter your pager number.
PAG#:
ENTER & SET
4 Enter your paging number up to 20 digits. This is the telephone
number which your machine must call.
5 Press Set .
6 Press Stop to exit.
You cannot change a Paging number remotely.
Remote Retrieval
This section is for the FAX-930 and FAX-940 E-mail. (If you have the
FAX-920 or MFC-925, please see chapter 9 for your remote fax options.)
You can call your machine from any touch tone phone (or remote Group
3 fax machine set for tone) and use a Remote Access Code and other
button presses to retrieve voice (and fax) messages. You can also
program and change some settings for your Message Manager.
Using the Remote Access Code
1 Dial your machine phone number from a touch tone phone.
2 When your machine answers and beeps, immediately enter your
Remote Access Code.
3 The machine signals the kinds of messages received:
1 long beep—Fax message(s)
2 long beeps—Voice message(s)
3 long beeps—Fax and Voice message(s)
No beeps—no messages